clk: qcom: gpucc-sm6350: Add *_wait_val values for GDSCs

Compared to the msm-4.19 driver the mainline GDSC driver always sets the
bits for en_rest, en_few & clk_dis, and if those values are not set
per-GDSC in the respective driver then the default value from the GDSC
driver is used. The downstream driver only conditionally sets
clk_dis_wait_val if qcom,clk-dis-wait-val is given in devicetree.

Correct this situation by explicitly setting those values. For all GDSCs
the reset value of those bits are used, with the exception of
gpu_cx_gdsc which has an explicit value (qcom,clk-dis-wait-val = <8>).

Fixes: 013804a ("clk: qcom: Add GPU clock controller driver for SM6350")
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Taniya Das <quic_tdas@quicinc.com>
Link: https://lore.kernel.org/r/20250425-sm6350-gdsc-val-v1-4-1f252d9c5e4e@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>

Author: lweiss-fairphone

drivers/clk/qcom/gpucc-sm6350.c

@@ -413,6 +413,9 @@ static struct clk_branch gpu_cc_gx_vsense_clk = {
 static struct gdsc gpu_cx_gdsc = {
 	.gdscr = 0x106c,
 	.gds_hw_ctrl = 0x1540,
+	.en_rest_wait_val = 0x2,
+	.en_few_wait_val = 0x2,
+	.clk_dis_wait_val = 0x8,
 	.pd = {
 		.name = "gpu_cx_gdsc",
 	},
@@ -423,6 +426,9 @@ static struct gdsc gpu_cx_gdsc = {
 static struct gdsc gpu_gx_gdsc = {
 	.gdscr = 0x100c,
 	.clamp_io_ctrl = 0x1508,
+	.en_rest_wait_val = 0x2,
+	.en_few_wait_val = 0x2,
+	.clk_dis_wait_val = 0x2,
 	.pd = {
 		.name = "gpu_gx_gdsc",
 		.power_on = gdsc_gx_do_nothing_enable,