Merge tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt driver updates for
  6.15-rc1. Included in here are:

   - Thunderbolt driver and core api updates for new hardware and
     features

   - usb-storage const array cleanups

   - typec driver updates

   - dwc3 driver updates

   - xhci driver updates and bugfixes

   - small USB documentation updates

   - usb cdns3 driver updates

   - usb gadget driver updates

   - other small driver updates and fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
  thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
  thunderbolt: Scan retimers after device router has been enumerated
  usb: host: cdns3: forward lost power information to xhci
  usb: host: xhci-plat: allow upper layers to signal power loss
  usb: xhci: change xhci_resume() parameters to explicit the desired info
  usb: cdns3-ti: run HW init at resume() if HW was reset
  usb: cdns3-ti: move reg writes to separate function
  usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
  usb: cdns3: rename hibernated argument of role->resume() to lost_power
  usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
  usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
  usb: dwc3: Don't use %pK through printk
  usb: core: Don't use %pK through printk
  usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
  dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
  usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
  usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
  usb: xhci: Don't change the status of stalled TDs on failed Stop EP
  xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
  xhci: Handle spurious events on Etron host isoc enpoints
  ...

Author: torvalds

Documentation/devicetree/bindings/mfd/aspeed-lpc.yaml

@@ -1,5 +1,5 @@
 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-# # Copyright (c) 2021 Aspeed Tehchnology Inc.
+# # Copyright (c) 2021 Aspeed Technology Inc.
 %YAML 1.2
 ---
 $id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml#

Documentation/devicetree/bindings/usb/generic-xhci.yaml

@@ -51,6 +51,8 @@ properties:
       - const: core
       - const: reg
 
+  dma-coherent: true
+
   power-domains:
     maxItems: 1
 

Documentation/devicetree/bindings/usb/microchip,usb2514.yaml

@@ -9,16 +9,19 @@ title: Microchip USB2514 Hub Controller
 maintainers:
   - Fabio Estevam <festevam@gmail.com>
 
-allOf:
-  - $ref: usb-device.yaml#
-
 properties:
   compatible:
-    enum:
-      - usb424,2412
-      - usb424,2417
-      - usb424,2514
-      - usb424,2517
+    oneOf:
+      - enum:
+          - usb424,2412
+          - usb424,2417
+          - usb424,2514
+          - usb424,2517
+      - items:
+          - enum:
+              - usb424,2512
+              - usb424,2513
+          - const: usb424,2514
 
   reg: true
 
@@ -28,6 +31,9 @@ properties:
   vdd-supply:
     description: 3.3V power supply.
 
+  vdda-supply:
+    description: 3.3V analog power supply.
+
   clocks:
     description: External 24MHz clock connected to the CLKIN pin.
     maxItems: 1
@@ -43,6 +49,18 @@ patternProperties:
     $ref: /schemas/usb/usb-device.yaml
     additionalProperties: true
 
+allOf:
+  - $ref: usb-device.yaml#
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: usb424,2514
+    then:
+      properties:
+        vdda-supply: false
+
 unevaluatedProperties: false
 
 examples:
@@ -60,6 +78,7 @@ examples:
             clocks = <&clks IMX6QDL_CLK_CKO>;
             reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
             vdd-supply = <&reg_3v3_hub>;
+            vdda-supply = <&reg_3v3a_hub>;
             #address-cells = <1>;
             #size-cells = <0>;
 

Documentation/devicetree/bindings/usb/parade,ps8830.yaml

@@ -0,0 +1,140 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/parade,ps8830.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Parade PS883x USB and DisplayPort Retimer
+
+maintainers:
+  - Abel Vesa <abel.vesa@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - parade,ps8830
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO Clock
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description: power supply (1.07V)
+
+  vdd33-supply:
+    description: power supply (3.3V)
+
+  vdd33-cap-supply:
+    description: power supply (3.3V)
+
+  vddar-supply:
+    description: power supply (1.07V)
+
+  vddat-supply:
+    description: power supply (1.07V)
+
+  vddio-supply:
+    description: power supply (1.2V or 1.8V)
+
+  orientation-switch: true
+  retimer-switch: true
+
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Super Speed (SS) Output endpoint to the Type-C connector
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        description: Super Speed (SS) Input endpoint from the Super-Speed PHY
+        unevaluatedProperties: false
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Sideband Use (SBU) AUX lines endpoint to the Type-C connector for the purpose of
+          handling altmode muxing and orientation switching.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - reset-gpios
+  - vdd-supply
+  - vdd33-supply
+  - vdd33-cap-supply
+  - vddat-supply
+  - vddio-supply
+  - orientation-switch
+  - retimer-switch
+
+allOf:
+  - $ref: usb-switch.yaml#
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec-mux@8 {
+            compatible = "parade,ps8830";
+            reg = <0x8>;
+
+            clocks = <&clk_rtmr_xo>;
+
+            vdd-supply = <&vreg_rtmr_1p15>;
+            vdd33-supply = <&vreg_rtmr_3p3>;
+            vdd33-cap-supply = <&vreg_rtmr_3p3>;
+            vddar-supply = <&vreg_rtmr_1p15>;
+            vddat-supply = <&vreg_rtmr_1p15>;
+            vddio-supply = <&vreg_rtmr_1p8>;
+
+            reset-gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
+
+            retimer-switch;
+            orientation-switch;
+
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+
+                    endpoint {
+                        remote-endpoint = <&typec_con_ss>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+
+                    endpoint {
+                        remote-endpoint = <&usb_phy_ss>;
+                    };
+                };
+
+                port@2 {
+                    reg = <2>;
+
+                    endpoint {
+                        remote-endpoint = <&typec_dp_aux>;
+                    };
+                };
+            };
+        };
+    };
+...

Documentation/devicetree/bindings/usb/qcom,dwc3.yaml

@@ -404,6 +404,7 @@ allOf:
           minItems: 2
           maxItems: 3
         interrupt-names:
+          minItems: 2
           items:
             - const: pwr_event
             - const: qusb2_phy
@@ -425,6 +426,7 @@ allOf:
           minItems: 3
           maxItems: 4
         interrupt-names:
+          minItems: 3
           items:
             - const: pwr_event
             - const: qusb2_phy

Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml

@@ -30,6 +30,9 @@ properties:
   interrupts:
     maxItems: 1
 
+  vbus-supply:
+    description: VBUS power supply
+
   wakeup-source:
     type: boolean
 

Documentation/devicetree/bindings/usb/rockchip,dwc3.yaml

@@ -26,6 +26,7 @@ select:
       contains:
         enum:
           - rockchip,rk3328-dwc3
+          - rockchip,rk3562-dwc3
           - rockchip,rk3568-dwc3
           - rockchip,rk3576-dwc3
           - rockchip,rk3588-dwc3
@@ -37,6 +38,7 @@ properties:
     items:
       - enum:
           - rockchip,rk3328-dwc3
+          - rockchip,rk3562-dwc3
           - rockchip,rk3568-dwc3
           - rockchip,rk3576-dwc3
           - rockchip,rk3588-dwc3
@@ -72,6 +74,7 @@ properties:
       - enum:
           - grf_clk
           - utmi
+          - pipe
       - const: pipe
 
   power-domains:
@@ -111,6 +114,22 @@ allOf:
             - const: suspend_clk
             - const: bus_clk
             - const: grf_clk
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3562-dwc3
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: ref_clk
+            - const: suspend_clk
+            - const: bus_clk
+            - const: pipe
   - if:
       properties:
         compatible:

Documentation/devicetree/bindings/usb/samsung,exynos-dwc3.yaml

@@ -11,12 +11,17 @@ maintainers:
 
 properties:
   compatible:
-    enum:
-      - google,gs101-dwusb3
-      - samsung,exynos5250-dwusb3
-      - samsung,exynos5433-dwusb3
-      - samsung,exynos7-dwusb3
-      - samsung,exynos850-dwusb3
+    oneOf:
+      - enum:
+          - google,gs101-dwusb3
+          - samsung,exynos5250-dwusb3
+          - samsung,exynos5433-dwusb3
+          - samsung,exynos7-dwusb3
+          - samsung,exynos7870-dwusb3
+          - samsung,exynos850-dwusb3
+      - items:
+          - const: samsung,exynos990-dwusb3
+          - const: samsung,exynos850-dwusb3
 
   '#address-cells':
     const: 1
@@ -52,7 +57,6 @@ required:
   - clock-names
   - ranges
   - '#size-cells'
-  - vdd10-supply
   - vdd33-supply
 
 allOf:
@@ -72,6 +76,8 @@ allOf:
             - const: susp_clk
             - const: link_aclk
             - const: link_pclk
+      required:
+        - vdd10-supply
 
   - if:
       properties:
@@ -86,6 +92,8 @@ allOf:
         clock-names:
           items:
             - const: usbdrd30
+      required:
+        - vdd10-supply
 
   - if:
       properties:
@@ -103,6 +111,8 @@ allOf:
             - const: susp_clk
             - const: phyclk
             - const: pipe_pclk
+      required:
+        - vdd10-supply
 
   - if:
       properties:
@@ -119,6 +129,24 @@ allOf:
             - const: usbdrd30
             - const: usbdrd30_susp_clk
             - const: usbdrd30_axius_clk
+      required:
+        - vdd10-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7870-dwusb3
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: bus_early
+            - const: ref
+            - const: ctrl
 
   - if:
       properties:
@@ -134,6 +162,8 @@ allOf:
           items:
             - const: bus_early
             - const: ref
+      required:
+        - vdd10-supply
 
 additionalProperties: false