leds: lp8860: Disable GPIO with devm action

This helps prevent mistakes like disable out of order in cleanup functions
and forgetting to free on error paths (as was done here).

This was the last thing the .remove() function did, so remove that too.

Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20250407183555.409687-6-afd@ti.com
Signed-off-by: Lee Jones <lee@kernel.org>

Author: glneo

drivers/leds/leds-lp8860.c

@@ -90,15 +90,13 @@
  * @led_dev: led class device pointer
  * @regmap: Devices register map
  * @eeprom_regmap: EEPROM register map
- * @enable_gpio: VDDIO/EN gpio to enable communication interface
  */
 struct lp8860_led {
 	struct mutex lock;
 	struct i2c_client *client;
 	struct led_classdev led_dev;
 	struct regmap *regmap;
 	struct regmap *eeprom_regmap;
-	struct gpio_desc *enable_gpio;
 };
 
 static const struct reg_sequence lp8860_eeprom_disp_regs[] = {
@@ -218,8 +216,6 @@ static int lp8860_init(struct lp8860_led *led)
 	unsigned int read_buf;
 	int ret, reg_count;
 
-	gpiod_direction_output(led->enable_gpio, 1);
-
 	ret = lp8860_fault_check(led);
 	if (ret)
 		goto out;
@@ -256,9 +252,6 @@ static int lp8860_init(struct lp8860_led *led)
 	return ret;
 
 out:
-	if (ret)
-		gpiod_direction_output(led->enable_gpio, 0);
-
 	return ret;
 }
 
@@ -276,13 +269,21 @@ static const struct regmap_config lp8860_eeprom_regmap_config = {
 	.max_register = LP8860_EEPROM_REG_24,
 };
 
+static void lp8860_disable_gpio(void *data)
+{
+	struct gpio_desc *gpio = data;
+
+	gpiod_set_value(gpio, 0);
+}
+
 static int lp8860_probe(struct i2c_client *client)
 {
 	int ret;
 	struct lp8860_led *led;
 	struct device_node *np = dev_of_node(&client->dev);
 	struct device_node *child_node;
 	struct led_init_data init_data = {};
+	struct gpio_desc *enable_gpio;
 
 	led = devm_kzalloc(&client->dev, sizeof(*led), GFP_KERNEL);
 	if (!led)
@@ -292,13 +293,11 @@ static int lp8860_probe(struct i2c_client *client)
 	if (!child_node)
 		return -EINVAL;
 
-	led->enable_gpio = devm_gpiod_get_optional(&client->dev,
-						   "enable", GPIOD_OUT_LOW);
-	if (IS_ERR(led->enable_gpio)) {
-		ret = PTR_ERR(led->enable_gpio);
-		dev_err(&client->dev, "Failed to get enable gpio: %d\n", ret);
-		return ret;
-	}
+	enable_gpio = devm_gpiod_get_optional(&client->dev, "enable", GPIOD_OUT_LOW);
+	if (IS_ERR(enable_gpio))
+		return dev_err_probe(&client->dev, PTR_ERR(enable_gpio),
+				     "Failed to get enable GPIO\n");
+	devm_add_action_or_reset(&client->dev, lp8860_disable_gpio, enable_gpio);
 
 	ret = devm_regulator_get_enable_optional(&client->dev, "vled");
 	if (ret && ret != -ENODEV)
@@ -310,8 +309,6 @@ static int lp8860_probe(struct i2c_client *client)
 
 	devm_mutex_init(&client->dev, &led->lock);
 
-	i2c_set_clientdata(client, led);
-
 	led->regmap = devm_regmap_init_i2c(client, &lp8860_regmap_config);
 	if (IS_ERR(led->regmap)) {
 		ret = PTR_ERR(led->regmap);
@@ -346,14 +343,6 @@ static int lp8860_probe(struct i2c_client *client)
 	return 0;
 }
 
-static void lp8860_remove(struct i2c_client *client)
-{
-	struct lp8860_led *led = i2c_get_clientdata(client);
-	int ret;
-
-	gpiod_direction_output(led->enable_gpio, 0);
-}
-
 static const struct i2c_device_id lp8860_id[] = {
 	{ "lp8860" },
 	{ }
@@ -372,7 +361,6 @@ static struct i2c_driver lp8860_driver = {
 		.of_match_table = of_lp8860_leds_match,
 	},
 	.probe		= lp8860_probe,
-	.remove		= lp8860_remove,
 	.id_table	= lp8860_id,
 };
 module_i2c_driver(lp8860_driver);