Merge tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB / Thunderbolt updates from Greg KH:
 "Here is the big set of USB and Thunderbolt changes for 6.10-rc1.
  Nothing hugely earth-shattering, just constant forward progress for
  hardware support of new devices and cleanups over the drivers.

  Included in here are:

   - Thunderbolt / USB 4 driver updates

   - typec driver updates

   - dwc3 driver updates

   - gadget driver updates

   - uss720 driver id additions and fixes (people use USB->arallel port
     devices still!)

   - onboard-hub driver rename and additions for new hardware

   - xhci driver updates

   - other small USB driver updates and additions for quirks and api
     changes

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'usb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (154 commits)
  drm/bridge: aux-hpd-bridge: correct devm_drm_dp_hpd_bridge_add() stub
  usb: fotg210: Add missing kernel doc description
  usb: dwc3: core: Fix unused variable warning in core driver
  usb: typec: tipd: rely on i2c_get_match_data()
  usb: typec: tipd: fix event checking for tps6598x
  usb: typec: tipd: fix event checking for tps25750
  dt-bindings: usb: qcom,dwc3: fix interrupt max items
  usb: fotg210: Use *-y instead of *-objs in Makefile
  usb: phy: tegra: Replace of_gpio.h by proper one
  usb: typec: ucsi: displayport: Fix potential deadlock
  usb: typec: qcom-pmic-typec: split HPD bridge alloc and registration
  usb: musc: Remove unused list 'buffers'
  usb: dwc3: Wait unconditionally after issuing EndXfer command
  usb: gadget: u_audio: Clear uac pointer when freed.
  usb: gadget: u_audio: Fix race condition use of controls after free during gadget unbind.
  dt-bindings: usb: dwc3: Add QDU1000 compatible
  usb: core: Remove the useless struct usb_devmap which is just a bitmap
  MAINTAINERS: Remove {ehci,uhci}-platform.c from ARM/VT8500 entry
  USB: usb_parse_endpoint: ignore reserved bits
  usb: xhci: compact 'trb_in_td()' arguments
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub renamed to Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-dev

@@ -5,4 +5,5 @@ Contact:	Matthias Kaehlcke <matthias@kaehlcke.net>
 		linux-usb@vger.kernel.org
 Description:
 		(RW) Controls whether the USB hub remains always powered
-		during system suspend or not.
+		during system suspend or not. This attribute is not
+		available for non-hub devices.

Documentation/devicetree/bindings/sound/xmos,xvf3500.yaml

@@ -0,0 +1,63 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/xmos,xvf3500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: XMOS XVF3500 VocalFusion Voice Processor
+
+maintainers:
+  - Javier Carrasco <javier.carrasco@wolfvision.net>
+
+description:
+  The XMOS XVF3500 VocalFusion Voice Processor is a low-latency, 32-bit
+  multicore controller for voice processing.
+  https://www.xmos.com/xvf3500/
+
+allOf:
+  - $ref: /schemas/usb/usb-device.yaml#
+
+properties:
+  compatible:
+    const: usb20b1,0013
+
+  reg: true
+
+  reset-gpios:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Regulator for the 1V0 supply.
+
+  vddio-supply:
+    description:
+      Regulator for the 3V3 supply.
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - vdd-supply
+  - vddio-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    usb {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        voice_processor: voice-processor@1 {
+            compatible = "usb20b1,0013";
+            reg = <1>;
+            reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+            vdd-supply = <&vcc1v0>;
+            vddio-supply = <&vcc3v3>;
+        };
+    };
+
+...

Documentation/devicetree/bindings/usb/chipidea,usb2-common.yaml

@@ -0,0 +1,200 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/chipidea,usb2-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: USB2 ChipIdea USB controller Common Properties
+
+maintainers:
+  - Xu Yang <xu.yang_2@nxp.com>
+
+properties:
+  reg:
+    minItems: 1
+    maxItems: 2
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  dr_mode: true
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    maxItems: 1
+
+  "#reset-cells":
+    const: 1
+
+  phy_type: true
+
+  itc-setting:
+    description:
+      interrupt threshold control register control, the setting should be
+      aligned with ITC bits at register USBCMD.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  ahb-burst-config:
+    description:
+      it is vendor dependent, the required value should be aligned with
+      AHBBRST at SBUSCFG, the range is from 0x0 to 0x7. This property is
+      used to change AHB burst configuration, check the chipidea spec for
+      meaning of each value. If this property is not existed, it will use
+      the reset value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x7
+
+  tx-burst-size-dword:
+    description:
+      it is vendor dependent, the tx burst size in dword (4 bytes), This
+      register represents the maximum length of a the burst in 32-bit
+      words while moving data from system memory to the USB bus, the value
+      of this property will only take effect if property "ahb-burst-config"
+      is set to 0, if this property is missing the reset default of the
+      hardware implementation will be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x20
+
+  rx-burst-size-dword:
+    description:
+      it is vendor dependent, the rx burst size in dword (4 bytes), This
+      register represents the maximum length of a the burst in 32-bit words
+      while moving data from the USB bus to system memory, the value of
+      this property will only take effect if property "ahb-burst-config"
+      is set to 0, if this property is missing the reset default of the
+      hardware implementation will be used.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x0
+    maximum: 0x20
+
+  extcon:
+    description:
+      Phandles to external connector devices. First phandle should point
+      to external connector, which provide "USB" cable events, the second
+      should point to external connector device, which provide "USB-HOST"
+      cable events. If one of the external connector devices is not
+      required, empty <0> phandle should be specified.
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    minItems: 1
+    items:
+      - description: vbus extcon
+      - description: id extcon
+
+  phy-clkgate-delay-us:
+    description:
+      The delay time (us) between putting the PHY into low power mode and
+      gating the PHY clock.
+
+  non-zero-ttctrl-ttha:
+    description:
+      After setting this property, the value of register ttctrl.ttha
+      will be 0x7f; if not, the value will be 0x0, this is the default
+      value. It needs to be very carefully for setting this property, it
+      is recommended that consult with your IC engineer before setting
+      this value.  On the most of chipidea platforms, the "usage_tt" flag
+      at RTL is 0, so this property only affects siTD.
+
+      If this property is not set, the max packet size is 1023 bytes, and
+      if the total of packet size for previous transactions are more than
+      256 bytes, it can't accept any transactions within this frame. The
+      use case is single transaction, but higher frame rate.
+
+      If this property is set, the max packet size is 188 bytes, it can
+      handle more transactions than above case, it can accept transactions
+      until it considers the left room size within frame is less than 188
+      bytes, software needs to make sure it does not send more than 90%
+      maximum_periodic_data_per_frame. The use case is multiple
+      transactions, but less frame rate.
+    type: boolean
+
+  mux-controls:
+    description:
+      The mux control for toggling host/device output of this controller.
+      It's expected that a mux state of 0 indicates device mode and a mux
+      state of 1 indicates host mode.
+    maxItems: 1
+
+  mux-control-names:
+    const: usb_switch
+
+  pinctrl-names:
+    description:
+      Names for optional pin modes in "default", "host", "device".
+      In case of HSIC-mode, "idle" and "active" pin modes are mandatory.
+      In this case, the "idle" state needs to pull down the data and
+      strobe pin and the "active" state needs to pull up the strobe pin.
+    oneOf:
+      - items:
+          - const: idle
+          - const: active
+      - items:
+          - const: default
+          - const: host
+          - const: device
+      - items:
+          - const: default
+          - enum:
+              - host
+              - device
+      - items:
+          - const: default
+
+  pinctrl-0:
+    maxItems: 1
+
+  pinctrl-1:
+    maxItems: 1
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: usb-phy
+
+  vbus-supply:
+    description: reference to the VBUS regulator.
+
+  usb-phy:
+    description: phandle for the PHY device. Use "phys" instead.
+    maxItems: 1
+    deprecated: true
+
+  port:
+    description:
+      Any connector to the data bus of this controller should be modelled
+      using the OF graph bindings specified, if the "usb-role-switch"
+      property is used.
+    $ref: /schemas/graph.yaml#/properties/port
+
+  reset-gpios:
+    maxItems: 1
+
+dependencies:
+  port: [ usb-role-switch ]
+  mux-controls: [ mux-control-names ]
+
+required:
+  - reg
+  - interrupts
+
+allOf:
+  - $ref: usb-hcd.yaml#
+  - $ref: usb-drd.yaml#
+
+additionalProperties: true