i2c: designware: Add ACPI HID for DWAPB I2C controller on FUJITSU-MONAKA

Enable DWAPB I2C controller support on FUJITSU-MONAKA.
This will be used in the FUJITSU-MONAKA server scheduled
for shipment in 2027.

The DSDT information obtained when verified using an
in-house simulator is presented below.

     Device (SMB0)
     {
         Name (_HID, "FUJI200B")  // _HID: Hardware ID
         Name (_UID, Zero)  // _UID: Unique ID
         ...
         Name (_CRS, ResourceTemplate ()
         {
             Memory32Fixed (ReadWrite,
                 0x2A4B0000,         // Address Base
                 0x00010000,         // Address Length
                 )
             Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
             {
                 0x00000159,
             }
         })
         ...
     }

The expression SMB0 is used to indicate SMBus HC#0,
a string of up to four characters.

Created the SMB0 object according to the following
specifications:

ACPI Specification
13.2. Accessing the SMBus from ASL Code
https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/13_ACPI_System_Mgmt_Bus_Interface_Spec/accessing-the-smbus-from-asl-code.html

IPMI Specification
Example 4: SSIF Interface(P574)
https://www.intel.co.jp/content/www/jp/ja/products/docs/servers/ipmi/ipmi-second-gen-interface-spec-v2-rev1-1.html

Signed-off-by: Yoshihiro Furudera <fj5100bi@fujitsu.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

Author: Yoshihiro-Furudera

drivers/i2c/busses/i2c-designware-platdrv.c

@@ -349,6 +349,7 @@ static const struct acpi_device_id dw_i2c_acpi_match[] = {
 	{ "AMDI0019", ACCESS_INTR_MASK | ARBITRATION_SEMAPHORE },
 	{ "AMDI0510", 0 },
 	{ "APMC0D0F", 0 },
+	{ "FUJI200B", 0 },
 	{ "HISI02A1", 0 },
 	{ "HISI02A2", 0 },
 	{ "HISI02A3", 0 },