Merge branch 'pci/controller/j721e'

- Add PCIe support for J722S SoC (Siddharth Vadapalli)

- Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100 us),
  before deasserting PERST# to ensure power and refclk are stable
  (Siddharth Vadapalli)

* pci/controller/j721e:
  PCI: j721e: Deassert PERST# after a delay of PCIE_T_PVPERL_MS milliseconds
  PCI: j721e: Add PCIe support for J722S SoC

Author: bjorn-helgaas

drivers/pci/controller/cadence/pci-j721e.c

@@ -386,6 +386,13 @@ static const struct j721e_pcie_data j784s4_pcie_ep_data = {
 	.max_lanes = 4,
 };
 
+static const struct j721e_pcie_data j722s_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+	.max_lanes = 1,
+};
+
 static const struct of_device_id of_j721e_pcie_match[] = {
 	{
 		.compatible = "ti,j721e-pcie-host",
@@ -419,6 +426,10 @@ static const struct of_device_id of_j721e_pcie_match[] = {
 		.compatible = "ti,j784s4-pcie-ep",
 		.data = &j784s4_pcie_ep_data,
 	},
+	{
+		.compatible = "ti,j722s-pcie-host",
+		.data = &j722s_pcie_rc_data,
+	},
 	{},
 };
 
@@ -572,15 +583,14 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 		pcie->refclk = clk;
 
 		/*
-		 * The "Power Sequencing and Reset Signal Timings" table of the
-		 * PCI Express Card Electromechanical Specification, Revision
-		 * 5.1, Section 2.9.2, Symbol "T_PERST-CLK", indicates PERST#
-		 * should be deasserted after minimum of 100us once REFCLK is
-		 * stable. The REFCLK to the connector in RC mode is selected
-		 * while enabling the PHY. So deassert PERST# after 100 us.
+		 * Section 2.2 of the PCI Express Card Electromechanical
+		 * Specification (Revision 5.1) mandates that the deassertion
+		 * of the PERST# signal should be delayed by 100 ms (TPVPERL).
+		 * This shall ensure that the power and the reference clock
+		 * are stable.
 		 */
 		if (gpiod) {
-			fsleep(PCIE_T_PERST_CLK_US);
+			msleep(PCIE_T_PVPERL_MS);
 			gpiod_set_value_cansleep(gpiod, 1);
 		}
 
@@ -671,15 +681,14 @@ static int j721e_pcie_resume_noirq(struct device *dev)
 			return ret;
 
 		/*
-		 * The "Power Sequencing and Reset Signal Timings" table of the
-		 * PCI Express Card Electromechanical Specification, Revision
-		 * 5.1, Section 2.9.2, Symbol "T_PERST-CLK", indicates PERST#
-		 * should be deasserted after minimum of 100us once REFCLK is
-		 * stable. The REFCLK to the connector in RC mode is selected
-		 * while enabling the PHY. So deassert PERST# after 100 us.
+		 * Section 2.2 of the PCI Express Card Electromechanical
+		 * Specification (Revision 5.1) mandates that the deassertion
+		 * of the PERST# signal should be delayed by 100 ms (TPVPERL).
+		 * This shall ensure that the power and the reference clock
+		 * are stable.
 		 */
 		if (pcie->reset_gpio) {
-			fsleep(PCIE_T_PERST_CLK_US);
+			msleep(PCIE_T_PVPERL_MS);
 			gpiod_set_value_cansleep(pcie->reset_gpio, 1);
 		}