Input: cyttsp5 - add handling for vddio regulator

The Cypress touchscreen controllers are often used with external pull-up
for the interrupt line and the I2C lines, so we might need to enable
a regulator to bring the lines into usable state. Otherwise, this might
cause spurious interrupts and reading from I2C will fail.

Implement support for a "vddio-supply" that is enabled by the cyttsp5
driver so that the regulator gets enabled when needed.

Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
Acked-by: Alistair Francis <alistair@alistair23.me>
Link: https://lore.kernel.org/r/20221117190507.87535-3-linmengbo0689@protonmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Author: bolilingmeng89006

drivers/input/touchscreen/cyttsp5.c

@@ -207,7 +207,7 @@ struct cyttsp5 {
 	int num_prv_rec;
 	struct regmap *regmap;
 	struct touchscreen_properties prop;
-	struct regulator *vdd;
+	struct regulator_bulk_data supplies[2];
 };
 
 /*
@@ -817,7 +817,7 @@ static void cyttsp5_cleanup(void *data)
 {
 	struct cyttsp5 *ts = data;
 
-	regulator_disable(ts->vdd);
+	regulator_bulk_disable(ARRAY_SIZE(ts->supplies), ts->supplies);
 }
 
 static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
@@ -840,19 +840,24 @@ static int cyttsp5_probe(struct device *dev, struct regmap *regmap, int irq,
 	init_completion(&ts->cmd_done);
 
 	/* Power up the device */
-	ts->vdd = devm_regulator_get(dev, "vdd");
-	if (IS_ERR(ts->vdd)) {
-		error = PTR_ERR(ts->vdd);
+	ts->supplies[0].supply = "vdd";
+	ts->supplies[1].supply = "vddio";
+	error = devm_regulator_bulk_get(dev, ARRAY_SIZE(ts->supplies),
+					ts->supplies);
+	if (error) {
+		dev_err(ts->dev, "Failed to get regulators, error %d\n", error);
 		return error;
 	}
 
 	error = devm_add_action_or_reset(dev, cyttsp5_cleanup, ts);
 	if (error)
 		return error;
 
-	error = regulator_enable(ts->vdd);
-	if (error)
+	error = regulator_bulk_enable(ARRAY_SIZE(ts->supplies), ts->supplies);
+	if (error) {
+		dev_err(ts->dev, "Failed to enable regulators, error %d\n", error);
 		return error;
+	}
 
 	ts->input = devm_input_allocate_device(dev);
 	if (!ts->input) {