clk: eyeq: add EyeQ6H west fixed factor clocks

Previous setup was:
 - pll-west clock registered from driver at of_clk_init();
 - Both OCC and UART clocks registered from DT using fixed-factor-clock
   compatible.

Now that drivers/clk/clk-eyeq.c supports registering fixed factors, use
that capability to register west-per-occ and west-per-uart (giving them
proper names at the same time).

Also switch from hard-coded index 0 for pll-west to using the
EQ6HC_WEST_PLL_PER constant by exposed dt-bindings headers.

All get exposed at of_clk_init() because they get used by the AMBA PL011
serial ports. Those are instantiated before platform bus infrastructure.

Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Link: https://lore.kernel.org/r/20241106-mbly-clk-v2-8-84cfefb3f485@bootlin.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>

Author: tleb

drivers/clk/clk-eyeq.c

@@ -712,12 +712,20 @@ static const struct eqc_early_match_data eqc_eyeq6h_central_early_match_data __i
 
 /* Required early for UART. */
 static const struct eqc_pll eqc_eyeq6h_west_early_plls[] = {
-	{ .index = 0, .name = "pll-west", .reg64 = 0x074 },
+	{ .index = EQ6HC_WEST_PLL_PER, .name = "pll-west", .reg64 = 0x074 },
+};
+
+static const struct eqc_fixed_factor eqc_eyeq6h_west_early_fixed_factors[] = {
+	{ EQ6HC_WEST_PER_OCC,  "west-per-occ",  1, 10, EQ6HC_WEST_PLL_PER },
+	{ EQ6HC_WEST_PER_UART, "west-per-uart", 1, 1,  EQ6HC_WEST_PER_OCC },
 };
 
 static const struct eqc_early_match_data eqc_eyeq6h_west_early_match_data __initconst = {
 	.early_pll_count	= ARRAY_SIZE(eqc_eyeq6h_west_early_plls),
 	.early_plls		= eqc_eyeq6h_west_early_plls,
+
+	.early_fixed_factor_count = ARRAY_SIZE(eqc_eyeq6h_west_early_fixed_factors),
+	.early_fixed_factors = eqc_eyeq6h_west_early_fixed_factors,
 };
 
 static void __init eqc_early_init(struct device_node *np,