Merge tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "New hardware support:

   - ST STM32MP25 combophy support

   - Sparx5 support for lan969x serdes and updates to driver to support
     this

   - NXP PTN3222 eUSB2 to USB2 redriver

   - Qualcomm SAR2130P eusb2 support, QCS8300 USB DW3 and QMP USB2
     support, X1E80100 QMP PCIe PHY Gen4 support, QCS615 and QCS8300 QMP
     UFS PHY support and SA8775P eDP PHY support

   - Rockchip rk3576 usbdp and rk3576 usb2 phy support

   - Binding for Microchip ATA6561 can phy

  Updates:

   - Freescale driver updates from hdmi support

   - Conversion of rockchip rk3228 hdmi phy binding to yaml

   - Broadcom usb2-phy deprecated support dropped and USB init array
     update for BCM4908

   - TI USXGMII mode support in J7200

   - Switch back to platform_driver::remove() subsystem update"

* tag 'phy-for-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (59 commits)
  phy: qcom: qmp: Fix lecacy-legacy typo
  phy: lan969x-serdes: add support for lan969x serdes driver
  dt-bindings: phy: sparx5: document lan969x
  phy: sparx5-serdes: add support for branching on chip type
  phy: sparx5-serdes: add indirection layer to register macros
  phy: sparx5-serdes: add function for getting the CMU index
  phy: sparx5-serdes: add ops to match data
  phy: sparx5-serdes: add constant for the number of CMU's
  phy: sparx5-serdes: add constants to match data
  phy: sparx5-serdes: add support for private match data
  phy: bcm-ns-usb2: drop support for old binding variant
  dt-bindings: phy: bcm-ns-usb2-phy: drop deprecated variant
  dt-bindings: phy: Add QMP UFS PHY compatible for QCS8300
  dt-bindings: phy: qcom: snps-eusb2: Add SAR2130P compatible
  dt-bindings: phy: ti,tcan104x-can: Document Microchip ATA6561
  phy: airoha: Fix REG_CSR_2L_RX{0,1}_REV0 definitions
  phy: airoha: Fix REG_CSR_2L_JCPLL_SDM_HREN config in airoha_pcie_phy_init_ssc_jcpll()
  phy: airoha: Fix REG_PCIE_PMA_TX_RESET config in airoha_pcie_phy_init_csr_2l()
  phy: airoha: Fix REG_CSR_2L_PLL_CMN_RESERVE0 config in airoha_pcie_phy_init_clk_out()
  phy: phy-rockchip-samsung-hdptx: Don't request RST_PHY/RST_ROPLL/RST_LCPLL
  ...

Author: torvalds

Documentation/devicetree/bindings/phy/bcm-ns-usb2-phy.yaml

@@ -18,16 +18,8 @@ properties:
     const: brcm,ns-usb2-phy
 
   reg:
-    anyOf:
-      - maxItems: 1
-        description: PHY control register
-      - maxItems: 1
-        description: iomem address range of DMU (Device Management Unit)
-        deprecated: true
-
-  reg-names:
-    items:
-      - const: dmu
+    maxItems: 1
+    description: PHY control register
 
   brcm,syscon-clkset:
     description: phandle to syscon for clkset register
@@ -50,12 +42,7 @@ required:
   - clocks
   - clock-names
   - "#phy-cells"
-
-oneOf:
-  - required:
-      - brcm,syscon-clkset
-  - required:
-      - reg-names
+  - brcm,syscon-clkset
 
 additionalProperties: false
 

Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml

@@ -32,6 +32,7 @@ properties:
           - enum:
               - fsl,imx8dxl-usbphy
               - fsl,imx8qm-usbphy
+              - fsl,imx8qxp-usbphy
               - fsl,imx8ulp-usbphy
           - const: fsl,imx7ulp-usbphy
 

Documentation/devicetree/bindings/phy/mediatek,tphy.yaml

@@ -125,6 +125,16 @@ properties:
     $ref: /schemas/types.yaml#/definitions/uint32
     default: 28
 
+  power-domains:
+    description:
+      The TPHY of MediaTek should exist within a power domain. The
+      developer should be aware that the hardware design of MediaTek TPHY
+      does not require the addition of MTCMOS. If the power to the TPHY
+      is turned off, it will impact other functions. From the current
+      perspective of USB hardware design, even if MTCMOS is added to the
+      TPHY, it should remain always on.
+    maxItems: 1
+
 # Required child node:
 patternProperties:
   "^(usb|pcie|sata)-phy@[0-9a-f]+$":

Documentation/devicetree/bindings/phy/microchip,sparx5-serdes.yaml

@@ -8,6 +8,7 @@ title: Microchip Sparx5 Serdes controller
 
 maintainers:
   - Steen Hegelund <steen.hegelund@microchip.com>
+  - Daniel Machon <daniel.machon@microchip.com>
 
 description: |
   The Sparx5 SERDES interfaces share the same basic functionality, but
@@ -62,12 +63,26 @@ description: |
   * 10.3125 Gbps (10GBASE-R/10GBASE-KR/USXGMII)
   * 25.78125 Gbps (25GBASE-KR/25GBASE-CR/25GBASE-SR/25GBASE-LR/25GBASE-ER)
 
+  lan969x has ten SERDES10G interfaces that share the same features, operating
+  modes and data rates as the equivalent Sparx5 SERDES10G interfaces.
+
 properties:
   $nodename:
     pattern: "^serdes@[0-9a-f]+$"
 
   compatible:
-    const: microchip,sparx5-serdes
+    oneOf:
+      - enum:
+          - microchip,sparx5-serdes
+          - microchip,lan9691-serdes
+      - items:
+          - enum:
+              - microchip,lan9698-serdes
+              - microchip,lan9696-serdes
+              - microchip,lan9694-serdes
+              - microchip,lan9693-serdes
+              - microchip,lan9692-serdes
+          - const: microchip,lan9691-serdes
 
   reg:
     minItems: 1

Documentation/devicetree/bindings/phy/nxp,ptn3222.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/nxp,ptn3222.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP PTN3222 1-port eUSB2 to USB2 redriver
+
+maintainers:
+  - Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - nxp,ptn3222
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  vdd1v8-supply:
+    description: power supply (1.8V)
+
+  vdd3v3-supply:
+    description: power supply (3.3V)
+
+  reset-gpios: true
+
+required:
+  - compatible
+  - reg
+  - '#phy-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        redriver@4f {
+            compatible = "nxp,ptn3222";
+            reg = <0x4f>;
+            #phy-cells = <0>;
+            vdd3v3-supply = <&vreg_3p3>;
+            vdd1v8-supply = <&vreg_1p8>;
+            reset-gpios = <&gpio_reset GPIO_ACTIVE_LOW>;
+        };
+    };
+...

Documentation/devicetree/bindings/phy/phy-cadence-sierra.yaml

@@ -96,7 +96,7 @@ patternProperties:
           Specifies the type of PHY for which the group of PHY lanes is used.
           Refer include/dt-bindings/phy/phy.h. Constants from the header should be used.
         $ref: /schemas/types.yaml#/definitions/uint32
-        enum: [2, 4]
+        enum: [2, 4, 8, 9]
 
       cdns,num-lanes:
         description:

Documentation/devicetree/bindings/phy/phy-rockchip-inno-hdmi.txt

@@ -13,6 +13,7 @@ maintainers:
 properties:
   compatible:
     enum:
+      - rockchip,rk3576-usbdp-phy
       - rockchip,rk3588-usbdp-phy
 
   reg:

Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml

@@ -17,6 +17,7 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,sa8775p-edp-phy
       - qcom,sc7280-edp-phy
       - qcom,sc8180x-edp-phy
       - qcom,sc8280xp-dp-phy

Documentation/devicetree/bindings/phy/qcom,edp-phy.yaml

@@ -15,7 +15,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,sa8775p-dwmac-sgmii-phy
+    oneOf:
+      - items:
+          - enum:
+              - qcom,qcs8300-dwmac-sgmii-phy
+          - const: qcom,sa8775p-dwmac-sgmii-phy
+      - const: qcom,sa8775p-dwmac-sgmii-phy
 
   reg:
     items: