thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens

IPQ5018 has tsens IP V1.0, 5 sensors of which 4 are in use and 1
interrupt. The IP does not have a RPM, hence use init routine for
tsens v1.0 without RPM which does not early enable.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: George Moussalem <george.moussalem@outlook.com>
Link: https://lore.kernel.org/r/DS7PR19MB8883BD0E36C08DD1D03CE1CB9DCC2@DS7PR19MB8883.namprd19.prod.outlook.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Author: Sricharan Ramabadhran

drivers/thermal/qcom/tsens-v1.c

@@ -242,3 +242,17 @@ struct tsens_plat_data data_8976 = {
 	.feat		= &tsens_v1_feat,
 	.fields		= tsens_v1_regfields,
 };
+
+const struct tsens_ops ops_ipq5018 = {
+	.init		= init_tsens_v1_no_rpm,
+	.calibrate	= tsens_calibrate_common,
+	.get_temp	= get_temp_tsens_valid,
+};
+
+const struct tsens_plat_data data_ipq5018 = {
+	.num_sensors	= 5,
+	.ops		= &ops_ipq5018,
+	.hw_ids		= (unsigned int []){0, 1, 2, 3, 4},
+	.feat		= &tsens_v1_no_rpm_feat,
+	.fields		= tsens_v1_regfields,
+};

drivers/thermal/qcom/tsens.c

@@ -1108,6 +1108,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume);
 
 static const struct of_device_id tsens_table[] = {
 	{
+		.compatible = "qcom,ipq5018-tsens",
+		.data = &data_ipq5018,
+	}, {
 		.compatible = "qcom,ipq5332-tsens",
 		.data = &data_ipq5332,
 	}, {

drivers/thermal/qcom/tsens.h

@@ -652,6 +652,9 @@ extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8
 /* TSENS v1 targets */
 extern struct tsens_plat_data data_tsens_v1, data_8937, data_8976, data_8956;
 
+/* TSENS v1 with no RPM targets */
+extern const struct tsens_plat_data data_ipq5018;
+
 /* TSENS v2 targets */
 extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
 extern const struct tsens_plat_data data_ipq5332, data_ipq5424;