Danfysik

Wiki > The Backend System > Specific Device IOC > Power Supplies > Danfysik

A way of controlling power supplies for magnets.

Current three models supported: 8800, 8000 and XXXX

All can be in calibrated or uncalibrated mode. Calibration is done within the IOC and enabled via macro. Additionally there is a macro to switch to a local calibration repository instead of the default common one. (see Calibration Files for more info)

All can be unipolar or bipolar.

Testing

All

Set voltage with %MYPVPREFIX%DFKPS_0X:SIM:VOLT Set current %MYPVPREFIX%DFKPS_01:SIM:RAW

8000

Interlock and power status can be testing by setting status PV: %MYPVPREFIX%DFKPS_0X:SIM:STATUS. To switch the power on put a ! as the first character to turn the interlock on place a ! as the 10th character.

8800/XXXX

Interlock and power status can be testing by setting status PV: %MYPVPREFIX%DFKPS_0X:SIM:STATUS. To switch the power off it must be a binary value with 2 digit set (e.g. 2) for the interlock it must be any value which is greater than 3 digit (e.g. 4). The value 6 would trigger both.