feat(doc): add link to fb2cdg1

Author: David Beneš

cards/silicom/fb2cdg1/readme.rst

@@ -0,0 +1,32 @@
+.. _card_fb2cdg1:
+
+Silicom fb2CDg1@AGM39D-2
+------------------------
+
+- Card information:
+    - Vendor: Silicom
+    - Name: fb2CDg1@AGM39D-2 (ThunderFjord)
+    - Ethernet ports: 2x QSFPDD56
+    - PCIe conectors: Edge connector
+    - `FPGA Card Website <https://www.silicom-usa.com/pr/server-adapters/programmable-fpga-server-adapter/fpga-intel-based-2/fpga-intel-agilex-based/fpga-smartnic-fb2cdg1agm39d-2-intel-based/>`_
+- FPGA specification:
+    - FPGA part number: ``AGMF039R47A2E2VR0``
+    - Ethernet Hard IP: F-Tile (up to 400G Ethernet)
+    - PCIe Hard IP: R-Tile (up to PCIe Gen5 x16)
+
+NDK firmware support
+^^^^^^^^^^^^^^^^^^^^
+
+- Ethernet cores that are supported in the NDK firmware:
+    - :ref:`F-Tile in the Network Module <ndk_intel_net_mod>`
+- PCIe cores that are supported in the NDK firmware:
+    - :ref:`R-Tile in the PCIe Module <ndk_intel_pcie_mod>`
+    - See the ``<NDK-FPGA_root_directory>/card/silicom/fb2cdg1/config/card_conf.tcl`` file for supported PCIe configurations.
+- Makefile targets for building the NDK firmware (valid for Minimal app, may vary for other apps):
+    - Use ``make 400g2`` command for firmware with 2x400GE (default).
+- Support for booting the NDK firmware using the nfb-boot tool:
+    - NO
+
+.. note::
+
+    To build the NDK firmware for this card, you must have the Intel Quartus Prime Pro and PACSign tool installed, including a valid license.

doc/source/index.rst

@@ -106,6 +106,7 @@ support a subset of these cards. A complete list of supported FPGA cards can be
     ndk_cards/silicom/fb4cgg3/readme
     ndk_cards/silicom/fb2cghh/readme
     ndk_cards/silicom/n6010/readme
+    ndk_cards/silicom/fb2cdg1/readme
     ndk_cards/bittware/ia-420f/readme
     ndk_cards/bittware/ia-440i/readme
     ndk_cards/amd/alveo-u200/readme