FPGA test shield: Allow any defined form factor

c1728p9 · Filip Jagodzinski · commit e74e3dd12496 · 2019-07-08T09:42:30.000+02:00
Build in the FPGA tests if either MBED_CONF_TARGET_DEFAULT_FORM_FACTOR
or TARGET_FF_ARDUINO is defined.
diff --git a/TESTS/mbed_hal_fpga_ci_test_shield/analogin/main.cpp b/TESTS/mbed_hal_fpga_ci_test_shield/analogin/main.cpp
@@ -19,7 +19,7 @@
 #error [NOT_SUPPORTED] Analog in not supported for this target
 #elif !COMPONENT_FPGA_CI_TEST_SHIELD
 #error [NOT_SUPPORTED] FPGA CI Test Shield is needed to run this test
-#elif !TARGET_FF_ARDUINO
+#elif !defined(TARGET_FF_ARDUINO) && !defined(MBED_CONF_TARGET_DEFAULT_FORM_FACTOR)
 #error [NOT_SUPPORTED] Test not supported for this form factor
 #else
 
diff --git a/TESTS/mbed_hal_fpga_ci_test_shield/analogout/main.cpp b/TESTS/mbed_hal_fpga_ci_test_shield/analogout/main.cpp
@@ -19,7 +19,7 @@
 #error [NOT_SUPPORTED] Analog out not supported for this target
 #elif !COMPONENT_FPGA_CI_TEST_SHIELD
 #error [NOT_SUPPORTED] FPGA CI Test Shield is needed to run this test
-#elif !TARGET_FF_ARDUINO
+#elif !defined(TARGET_FF_ARDUINO) && !defined(MBED_CONF_TARGET_DEFAULT_FORM_FACTOR)
 #error [NOT_SUPPORTED] Test not supported for this form factor
 #else
 
diff --git a/TESTS/mbed_hal_fpga_ci_test_shield/gpio/main.cpp b/TESTS/mbed_hal_fpga_ci_test_shield/gpio/main.cpp
@@ -17,7 +17,7 @@
 
 #if !COMPONENT_FPGA_CI_TEST_SHIELD
 #error [NOT_SUPPORTED] FPGA CI Test Shield is needed to run this test
-#elif !TARGET_FF_ARDUINO
+#elif !defined(TARGET_FF_ARDUINO) && !defined(MBED_CONF_TARGET_DEFAULT_FORM_FACTOR)
 #error [NOT_SUPPORTED] Test not supported for this form factor
 #else
 
diff --git a/TESTS/mbed_hal_fpga_ci_test_shield/gpio_irq/main.cpp b/TESTS/mbed_hal_fpga_ci_test_shield/gpio_irq/main.cpp
@@ -19,7 +19,7 @@
 #error [NOT_SUPPORTED] test not supported
 #elif !COMPONENT_FPGA_CI_TEST_SHIELD
 #error [NOT_SUPPORTED] FPGA CI Test Shield is needed to run this test
-#elif !TARGET_FF_ARDUINO
+#elif !defined(TARGET_FF_ARDUINO) && !defined(MBED_CONF_TARGET_DEFAULT_FORM_FACTOR)
 #error [NOT_SUPPORTED] Test not supported for this form factor
 #else
 
diff --git a/TESTS/mbed_hal_fpga_ci_test_shield/i2c/main.cpp b/TESTS/mbed_hal_fpga_ci_test_shield/i2c/main.cpp
@@ -19,7 +19,7 @@
 #error [NOT_SUPPORTED] I2C not supported for this target
 #elif !COMPONENT_FPGA_CI_TEST_SHIELD
 #error [NOT_SUPPORTED] FPGA CI Test Shield is needed to run this test
-#elif !TARGET_FF_ARDUINO
+#elif !defined(TARGET_FF_ARDUINO) && !defined(MBED_CONF_TARGET_DEFAULT_FORM_FACTOR)
 #error [NOT_SUPPORTED] Test not supported for this form factor
 #else
 
diff --git a/TESTS/mbed_hal_fpga_ci_test_shield/pwm/main.cpp b/TESTS/mbed_hal_fpga_ci_test_shield/pwm/main.cpp
@@ -19,7 +19,7 @@
 #error [NOT_SUPPORTED] PWM not supported for this target
 #elif !COMPONENT_FPGA_CI_TEST_SHIELD
 #error [NOT_SUPPORTED] FPGA CI Test Shield is needed to run this test
-#elif !TARGET_FF_ARDUINO
+#elif !defined(TARGET_FF_ARDUINO) && !defined(MBED_CONF_TARGET_DEFAULT_FORM_FACTOR)
 #error [NOT_SUPPORTED] Test not supported for this form factor
 #else
 
diff --git a/TESTS/mbed_hal_fpga_ci_test_shield/spi/main.cpp b/TESTS/mbed_hal_fpga_ci_test_shield/spi/main.cpp
@@ -19,7 +19,7 @@
 #error [NOT_SUPPORTED] SPI not supported for this target
 #elif !COMPONENT_FPGA_CI_TEST_SHIELD
 #error [NOT_SUPPORTED] FPGA CI Test Shield is needed to run this test
-#elif !TARGET_FF_ARDUINO
+#elif !defined(TARGET_FF_ARDUINO) && !defined(MBED_CONF_TARGET_DEFAULT_FORM_FACTOR)
 #error [NOT_SUPPORTED] Test not supported for this form factor
 #else
 
diff --git a/TESTS/mbed_hal_fpga_ci_test_shield/uart/main.cpp b/TESTS/mbed_hal_fpga_ci_test_shield/uart/main.cpp
@@ -19,7 +19,7 @@
 #error [NOT_SUPPORTED] SERIAL not supported for this target
 #elif !COMPONENT_FPGA_CI_TEST_SHIELD
 #error [NOT_SUPPORTED] FPGA CI Test Shield is needed to run this test
-#elif !TARGET_FF_ARDUINO
+#elif !defined(TARGET_FF_ARDUINO) && !defined(MBED_CONF_TARGET_DEFAULT_FORM_FACTOR)
 #error [NOT_SUPPORTED] Test not supported for this form factor
 #else
 
@@ -340,4 +340,4 @@ int main()
     Harness::run(specification);
 }
 
-#endif /* !DEVICE_SERIAL */
+#endif /* !DEVICE_SERIAL */
