Merge pull request #12320 from mtomczykmobica/ONME-3433

ONME-3433 ESP8266 driver support for UDP get - modified ESP8266 drive…

Author: 0xc0170

components/wifi/esp8266-driver/ESP8266/ESP8266.cpp

@@ -373,6 +373,17 @@ bool ESP8266::disconnect(void)
     return done;
 }
 
+bool ESP8266::ip_info_print(int enable)
+{
+    _smutex.lock();
+    _disconnect = true;
+    bool done = _parser.send("AT+CIPDINFO=%d", enable) && _parser.recv("OK\n");
+    _smutex.unlock();
+
+    return done;
+}
+
+
 const char *ESP8266::ip_addr(void)
 {
     _smutex.lock();
@@ -508,11 +519,13 @@ int ESP8266::scan(WiFiAccessPoint *res, unsigned limit, scan_mode mode, unsigned
     return cnt;
 }
 
-nsapi_error_t ESP8266::open_udp(int id, const char *addr, int port, int local_port)
+nsapi_error_t ESP8266::open_udp(int id, const char *addr, int port, int local_port, int udp_mode)
 {
     static const char *type = "UDP";
     bool done = false;
 
+    ip_info_print(1);
+
     _smutex.lock();
 
     // process OOB so that _sock_i reflects the correct state of the socket
@@ -533,7 +546,7 @@ nsapi_error_t ESP8266::open_udp(int id, const char *addr, int port, int local_po
 
     for (int i = 0; i < 2; i++) {
         if (local_port) {
-            done = _parser.send("AT+CIPSTART=%d,\"%s\",\"%s\",%d,%d", id, type, addr, port, local_port);
+            done = _parser.send("AT+CIPSTART=%d,\"%s\",\"%s\",%d,%d,%d", id, type, addr, port, local_port, udp_mode);
         } else {
             done = _parser.send("AT+CIPSTART=%d,\"%s\",\"%s\",%d", id, type, addr, port);
         }
@@ -572,6 +585,8 @@ nsapi_error_t ESP8266::open_tcp(int id, const char *addr, int port, int keepaliv
     static const char *type = "TCP";
     bool done = false;
 
+    ip_info_print(1);
+
     if (!addr) {
         return NSAPI_ERROR_PARAMETER;
     }
@@ -754,6 +769,7 @@ nsapi_size_or_error_t ESP8266::send(int id, const void *data, uint32_t amount)
 void ESP8266::_oob_packet_hdlr()
 {
     int id;
+    int port;
     int amount;
     int pdu_len;
 
@@ -763,6 +779,8 @@ void ESP8266::_oob_packet_hdlr()
     }
 
     if (_tcp_passive && _sock_i[id].open == true && _sock_i[id].proto == NSAPI_TCP) {
+        //For TCP +IPD return only id and amount and it is independent on AT+CIPDINFO settings
+        //Unfortunately no information about that in ESP manual but it has sense.
         if (_parser.recv("%d\n", &amount)) {
             _sock_i[id].tcp_data_avbl = amount;
 
@@ -772,8 +790,12 @@ void ESP8266::_oob_packet_hdlr()
             }
         }
         return;
-    } else if (!_parser.scanf("%d:", &amount)) {
-        return;
+    } else {
+        if (!(_parser.scanf("%d,", &amount)
+                && _parser.scanf("%15[^,],", _ip_buffer)
+                && _parser.scanf("%d:", &port))) {
+            return;
+        }
     }
 
     pdu_len = sizeof(struct packet) + amount;
@@ -791,6 +813,10 @@ void ESP8266::_oob_packet_hdlr()
     _heap_usage += pdu_len;
 
     packet->id = id;
+    if (_sock_i[id].proto == NSAPI_UDP) {
+        packet->remote_port = port;
+        memcpy(packet->remote_ip, _ip_buffer, 16);
+    }
     packet->len = amount;
     packet->alloc_len = amount;
     packet->next = 0;
@@ -943,7 +969,7 @@ int32_t ESP8266::recv_tcp(int id, void *data, uint32_t amount, uint32_t timeout)
     return NSAPI_ERROR_WOULD_BLOCK;
 }
 
-int32_t ESP8266::recv_udp(int id, void *data, uint32_t amount, uint32_t timeout)
+int32_t ESP8266::recv_udp(struct esp8266_socket *socket, void *data, uint32_t amount, uint32_t timeout)
 {
     _smutex.lock();
     set_timeout(timeout);
@@ -956,9 +982,12 @@ int32_t ESP8266::recv_udp(int id, void *data, uint32_t amount, uint32_t timeout)
 
     // check if any packets are ready for us
     for (struct packet **p = &_packets; *p; p = &(*p)->next) {
-        if ((*p)->id == id) {
+        if ((*p)->id == socket->id) {
             struct packet *q = *p;
 
+            socket->addr.set_ip_address((*p)->remote_ip);
+            socket->addr.set_port((*p)->remote_port);
+
             // Return and remove packet (truncated if necessary)
             uint32_t len = q->len < amount ? q->len : amount;
             memcpy(data, q + 1, len);

components/wifi/esp8266-driver/ESP8266/ESP8266.h

@@ -29,6 +29,7 @@
 #include "platform/mbed_error.h"
 #include "rtos/Mutex.h"
 #include "rtos/ThisThread.h"
+#include "features/netsocket/SocketAddress.h"
 
 // Various timeouts for different ESP8266 operations
 #ifndef ESP8266_CONNECT_TIMEOUT
@@ -64,6 +65,15 @@
 #define FW_AT_LEAST_VERSION(MAJOR,MINOR,PATCH,NUSED/*Not used*/,REF) \
     (((MAJOR)*1000000+(MINOR)*10000+(PATCH)*100) >= REF ? true : false)
 
+struct esp8266_socket {
+    int id;
+    nsapi_protocol_t proto;
+    bool connected;
+    bool bound;
+    SocketAddress addr;
+    int keepalive; // TCP
+};
+
 /** ESP8266Interface class.
     This is an interface to a ESP8266 radio.
  */
@@ -167,6 +177,14 @@ class ESP8266 {
     */
     bool disconnect(void);
 
+    /**
+    * Enable or disable Remote IP and Port printing with +IPD
+    *
+    * @param enable, 1 on, 0 off
+    * @return true only if ESP8266 is disconnected successfully
+    */
+    bool ip_info_print(int enable);
+
     /**
     * Get the IP address of ESP8266
     *
@@ -236,9 +254,10 @@ class ESP8266 {
     * @param addr the IP address of the destination
     * @param port the port on the destination
     * @param local_port UDP socket's local port, zero means any
+    * @param udp_mode UDP socket's mode, zero means can't change remote, 1 can change once, 2 can change multiple times
     * @return NSAPI_ERROR_OK in success, negative error code in failure
     */
-    nsapi_error_t open_udp(int id, const char *addr, int port, int local_port = 0);
+    nsapi_error_t open_udp(int id, const char *addr, int port, int local_port = 0, int udp_mode = 0);
 
     /**
     * Open a socketed connection
@@ -271,7 +290,7 @@ class ESP8266 {
     * @param amount number of bytes to be received
     * @return the number of bytes received
     */
-    int32_t recv_udp(int id, void *data, uint32_t amount, uint32_t timeout = ESP8266_RECV_TIMEOUT);
+    int32_t recv_udp(struct esp8266_socket *socket, void *data, uint32_t amount, uint32_t timeout = ESP8266_RECV_TIMEOUT);
 
     /**
     * Receives stream data from an open TCP socket
@@ -442,6 +461,8 @@ class ESP8266 {
     struct packet {
         struct packet *next;
         int id;
+        char remote_ip[16];
+        int remote_port;
         uint32_t len; // Remaining length
         uint32_t alloc_len; // Original length
         // data follows

components/wifi/esp8266-driver/ESP8266Interface.cpp

@@ -54,6 +54,8 @@
 
 #define ESP8266_WIFI_IF_NAME "es0"
 
+#define LOCAL_ADDR "127.0.0.1"
+
 using namespace mbed;
 using namespace rtos;
 
@@ -750,14 +752,6 @@ nsapi_error_t ESP8266Interface::_reset()
     return _esp.at_available() ? NSAPI_ERROR_OK : NSAPI_ERROR_DEVICE_ERROR;
 }
 
-struct esp8266_socket {
-    int id;
-    nsapi_protocol_t proto;
-    bool connected;
-    SocketAddress addr;
-    int keepalive; // TCP
-};
-
 int ESP8266Interface::socket_open(void **handle, nsapi_protocol_t proto)
 {
     // Look for an unused socket
@@ -783,6 +777,7 @@ int ESP8266Interface::socket_open(void **handle, nsapi_protocol_t proto)
     socket->id = id;
     socket->proto = proto;
     socket->connected = false;
+    socket->bound = false;
     socket->keepalive = 0;
     *handle = socket;
     return 0;
@@ -801,11 +796,16 @@ int ESP8266Interface::socket_close(void *handle)
         err = NSAPI_ERROR_DEVICE_ERROR;
     }
 
+    if (socket->bound && !_esp.close(socket->id)) {
+        err = NSAPI_ERROR_DEVICE_ERROR;
+    }
+
     _cbs[socket->id].callback = NULL;
     _cbs[socket->id].data = NULL;
     core_util_atomic_store_u8(&_cbs[socket->id].deferred, false);
 
     socket->connected = false;
+    socket->bound = false;
     _sock_i[socket->id].open = false;
     _sock_i[socket->id].sport = 0;
     delete socket;
@@ -828,12 +828,17 @@ int ESP8266Interface::socket_bind(void *handle, const SocketAddress &address)
         for (int id = 0; id < ESP8266_SOCKET_COUNT; id++) {
             if (_sock_i[id].sport == address.get_port() && id != socket->id) { // Port already reserved by another socket
                 return NSAPI_ERROR_PARAMETER;
-            } else if (id == socket->id && socket->connected) {
+            } else if (id == socket->id && (socket->connected || socket->bound)) {
                 return NSAPI_ERROR_PARAMETER;
             }
         }
         _sock_i[socket->id].sport = address.get_port();
-        return 0;
+
+        int ret = _esp.open_udp(socket->id, LOCAL_ADDR, address.get_port(), _sock_i[socket->id].sport, 2);
+
+        socket->bound = (ret == NSAPI_ERROR_OK) ? true : false;
+
+        return ret;
     }
 
     return NSAPI_ERROR_UNSUPPORTED;
@@ -854,7 +859,7 @@ int ESP8266Interface::socket_connect(void *handle, const SocketAddress &addr)
     }
 
     if (socket->proto == NSAPI_UDP) {
-        ret = _esp.open_udp(socket->id, addr.get_ip_address(), addr.get_port(), _sock_i[socket->id].sport);
+        ret = _esp.open_udp(socket->id, addr.get_ip_address(), addr.get_port(), _sock_i[socket->id].sport, 0);
     } else {
         ret = _esp.open_tcp(socket->id, addr.get_ip_address(), addr.get_port(), socket->keepalive);
     }
@@ -925,7 +930,7 @@ int ESP8266Interface::socket_recv(void *handle, void *data, unsigned size)
             socket->connected = false;
         }
     } else {
-        recv = _esp.recv_udp(socket->id, data, size);
+        recv = _esp.recv_udp(socket, data, size);
     }
 
     return recv;
@@ -950,14 +955,18 @@ int ESP8266Interface::socket_sendto(void *handle, const SocketAddress &addr, con
         socket->connected = false;
     }
 
-    if (!socket->connected) {
+    if (!socket->connected && !socket->bound) {
         int err = socket_connect(socket, addr);
         if (err < 0) {
             return err;
         }
         socket->addr = addr;
     }
 
+    if (socket->bound) {
+        socket->addr = addr;
+    }
+
     return socket_send(socket, data, size);
 }