STM32F2 USB pins addition

Author: jeromecoutant

targets/TARGET_STM/TARGET_STM32F2/TARGET_NUCLEO_F207ZG/PeripheralNames.h

@@ -88,6 +88,11 @@ typedef enum {
     CAN_2 = (int)CAN2_BASE
 } CANName;
 
+typedef enum {
+    USB_FS = (int)USB_OTG_FS_PERIPH_BASE,
+    USB_HS = (int)USB_OTG_HS_PERIPH_BASE
+} USBName;
+
 #ifdef __cplusplus
 }
 #endif

targets/TARGET_STM/TARGET_STM32F2/TARGET_NUCLEO_F207ZG/PeripheralPins.c

@@ -335,3 +335,40 @@ MBED_WEAK const PinMap PinMap_CAN_TD[] = {
     {PD_1,       CAN_1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
     {NC, NC, 0}
 };
+
+//*** USBDEVICE ***
+
+MBED_WEAK const PinMap PinMap_USB_FS[] = {
+//  {PA_8,      USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF // Connected to USB_SOF [TP1]
+    {PA_9,      USB_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS // Connected to USB_VBUS
+    {PA_10,     USB_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID // Connected to USB_ID
+    {PA_11,     USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM // Connected to USB_DM
+    {PA_12,     USB_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP // Connected to USB_DP
+    {NC, NC, 0}
+};
+
+//*** USBDEVICE ***
+
+MBED_WEAK const PinMap PinMap_USB_HS[] = {
+#if (MBED_CONF_TARGET_USB_SPEED == USE_USB_HS_IN_FS)
+//  {PA_4,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_SOF
+    {PB_12,     USB_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
+    {PB_13,     USB_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_VBUS // Connected to RMII_TXD1 [LAN8742A-CZ-TR_TXD1]
+    {PB_14,     USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM // Connected to LD3 [Red]
+    {PB_15,     USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP
+#else /* MBED_CONF_TARGET_USB_SPEED */
+    {PA_3,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0
+    {PA_5,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_CK
+    {PB_0,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1
+    {PB_1,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2
+    {PB_5,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7
+    {PB_10,     USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3
+    {PB_11,     USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D4
+    {PB_12,     USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5
+    {PB_13,     USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6 // Connected to RMII_TXD1 [LAN8742A-CZ-TR_TXD1]
+    {PC_0,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP
+    {PC_2,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_DIR
+    {PC_3,      USB_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_NXT
+#endif /* MBED_CONF_TARGET_USB_SPEED */
+    {NC, NC, 0}
+};

targets/TARGET_STM/TARGET_STM32F2/TARGET_NUCLEO_F207ZG/PinNames.h

@@ -272,12 +272,14 @@ typedef enum {
     SPI_CS      = D10,
     PWM_OUT     = D9,
 
-    /**** USB pins ****/
+    /**** USB FS pins ****/
     USB_OTG_FS_DM = PA_11,
     USB_OTG_FS_DP = PA_12,
     USB_OTG_FS_ID = PA_10,
     USB_OTG_FS_SOF = PA_8,
     USB_OTG_FS_VBUS = PA_9,
+
+    /**** USB HS pins ****/
     USB_OTG_HS_DM = PB_14,
     USB_OTG_HS_DP = PB_15,
     USB_OTG_HS_ID = PB_12,