MCUXpresso: Updated SMC SDK driver

Update includes allocating RAM region for code to enter
stop modes and execute this code in RAM, thus the flash
is idle and no prefetch is performed while entering stop
mode.

Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>

Author: mmahadevan108

targets/TARGET_Freescale/TARGET_MCUXpresso_MCUS/TARGET_K66F/drivers/fsl_smc.c

@@ -1,31 +1,9 @@
 /*
  * Copyright (c) 2015, Freescale Semiconductor, Inc.
  * Copyright 2016-2017 NXP
+ * All rights reserved.
  *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- * o Redistributions of source code must retain the above copyright notice, this list
- *   of conditions and the following disclaimer.
- *
- * o Redistributions in binary form must reproduce the above copyright notice, this
- *   list of conditions and the following disclaimer in the documentation and/or
- *   other materials provided with the distribution.
- *
- * o Neither the name of the copyright holder nor the names of its
- *   contributors may be used to endorse or promote products derived from this
- *   software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
- * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
- * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
- * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ * SPDX-License-Identifier: BSD-3-Clause
  */
 
 #ifndef _FSL_SMC_H_
@@ -36,15 +14,14 @@
 /*! @addtogroup smc */
 /*! @{ */
 
-
 /*******************************************************************************
  * Definitions
  ******************************************************************************/
 
 /*! @name Driver version */
 /*@{*/
-/*! @brief SMC driver version 2.0.3. */
-#define FSL_SMC_DRIVER_VERSION (MAKE_VERSION(2, 0, 3))
+/*! @brief SMC driver version 2.0.5. */
+#define FSL_SMC_DRIVER_VERSION (MAKE_VERSION(2, 0, 5))
 /*@}*/
 
 /*!
@@ -64,18 +41,14 @@ typedef enum _smc_power_mode_protection
 #endif                                                 /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */
     kSMC_AllowPowerModeAll = (0U
 #if (defined(FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_VERY_LOW_LEAKAGE_STOP_MODE)
-                              |
-                              SMC_PMPROT_AVLLS_MASK
+                              | SMC_PMPROT_AVLLS_MASK
 #endif
 #if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE)
-                              |
-                              SMC_PMPROT_ALLS_MASK
+                              | SMC_PMPROT_ALLS_MASK
 #endif /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */
-                              |
-                              SMC_PMPROT_AVLP_MASK
+                              | SMC_PMPROT_AVLP_MASK
 #if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE)
-                              |
-                              kSMC_AllowPowerModeHsrun
+                              | kSMC_AllowPowerModeHsrun
 #endif                          /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */
                               ) /*!< Allow all power mode.              */
 } smc_power_mode_protection_t;
@@ -85,7 +58,7 @@ typedef enum _smc_power_mode_protection
  */
 typedef enum _smc_power_state
 {
-    kSMC_PowerStateRun = 0x01U << 0U,  /*!< 0000_0001 - Current power mode is RUN   */
+    kSMC_PowerStateRun  = 0x01U << 0U, /*!< 0000_0001 - Current power mode is RUN   */
     kSMC_PowerStateStop = 0x01U << 1U, /*!< 0000_0010 - Current power mode is STOP  */
     kSMC_PowerStateVlpr = 0x01U << 2U, /*!< 0000_0100 - Current power mode is VLPR  */
     kSMC_PowerStateVlpw = 0x01U << 3U, /*!< 0000_1000 - Current power mode is VLPW  */
@@ -107,7 +80,7 @@ typedef enum _smc_power_state
 typedef enum _smc_run_mode
 {
     kSMC_RunNormal = 0U, /*!< Normal RUN mode.             */
-    kSMC_RunVlpr = 2U,   /*!< Very-low-power RUN mode.     */
+    kSMC_RunVlpr   = 2U, /*!< Very-low-power RUN mode.     */
 #if (defined(FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE) && FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE)
     kSMC_Hsrun = 3U /*!< High-speed Run mode (HSRUN). */
 #endif              /* FSL_FEATURE_SMC_HAS_HIGH_SPEED_RUN_MODE */
@@ -119,7 +92,7 @@ typedef enum _smc_run_mode
 typedef enum _smc_stop_mode
 {
     kSMC_StopNormal = 0U, /*!< Normal STOP mode.           */
-    kSMC_StopVlps = 2U,   /*!< Very-low-power STOP mode.   */
+    kSMC_StopVlps   = 2U, /*!< Very-low-power STOP mode.   */
 #if (defined(FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE) && FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE)
     kSMC_StopLls = 3U, /*!< Low-leakage Stop mode.      */
 #endif                 /* FSL_FEATURE_SMC_HAS_LOW_LEAKAGE_STOP_MODE */
@@ -148,7 +121,7 @@ typedef enum _smc_stop_submode
  */
 typedef enum _smc_partial_stop_mode
 {
-    kSMC_PartialStop = 0U,  /*!< STOP - Normal Stop mode*/
+    kSMC_PartialStop  = 0U, /*!< STOP - Normal Stop mode*/
     kSMC_PartialStop1 = 1U, /*!< Partial Stop with both system and bus clocks disabled*/
     kSMC_PartialStop2 = 2U, /*!< Partial Stop with system clock disabled and bus clock enabled*/
 } smc_partial_stop_option_t;
@@ -324,23 +297,15 @@ void SMC_PostExitStopModes(void);
  *
  * This function should be called before entering WAIT/VLPW modes.
  */
-static inline void SMC_PreEnterWaitModes(void)
-{
-    __disable_irq();
-    __ISB();
-}
+void SMC_PreEnterWaitModes(void);
 
 /*!
  * @brief Recovers after wake up from stop modes.
  *
  * This function should be called after wake up from WAIT/VLPW modes.
  * It is used with @ref SMC_PreEnterWaitModes.
  */
-static inline void SMC_PostExitWaitModes(void)
-{
-    __enable_irq();
-    __ISB();
-}
+void SMC_PostExitWaitModes(void);
 
 /*!
  * @brief Configures the system to RUN power mode.