Update common libraries

Updated Serial Flash interface & Network buffer classes to avoid warnings and improve robustness. Fixed issue with mbed_overrides trying to use an old implementation of cy_serial_flash_init() function.

Author: cy-opm

targets/TARGET_Cypress/TARGET_PSOC6/common/cy_network_buffer.c

@@ -28,12 +28,13 @@
 #include <stdlib.h>
 #include "cy_network_buffer.h"
 #include "cy_utils.h"
-#include "memp.h"
+#include "lwip/memp.h"
 #define  SDIO_BLOCK_SIZE (64U)
 
 whd_result_t cy_host_buffer_get(whd_buffer_t *buffer, whd_buffer_dir_t direction, unsigned short size, unsigned long timeout_ms)
 {
     UNUSED_PARAMETER( direction );
+    UNUSED_PARAMETER( timeout_ms );
     struct pbuf *p = NULL;
     if ( ( direction == WHD_NETWORK_TX) && ( size <= PBUF_POOL_BUFSIZE ) )
     {

targets/TARGET_Cypress/TARGET_PSOC6/common/cy_network_buffer.h

@@ -39,7 +39,7 @@
 #include "cy_result.h"
 #include "whd.h"
 #include "whd_network_types.h"
-#include "pbuf.h"
+#include "lwip/pbuf.h"
 
 #if defined(__cplusplus)
 extern "C" {

targets/TARGET_Cypress/TARGET_PSOC6/common/cy_serial_flash_prog.c

@@ -72,7 +72,8 @@ const stc_smif_ipblocks_arr_t smifIpBlocksArr = {&smifBlockConfig, 0x00000000};
  * process and programming tools to determine key characteristics about the memory usage including
  * where the boot process should start the application from and what external memories are connected
  * (if any). This must consume a full row of flash memory row. The last entry is a checksum of the
- * other values in the ToC which must be updated if any other value changes.
+ * other values in the ToC which must be updated if any other value changes. This can be done manually
+ * or by running 'cymcuelftool -S' to recompute the checksum.
  */
 CY_SECTION(".cy_toc_part2") __attribute__( (used) )
 const uint32_t cyToc[128] =

targets/TARGET_Cypress/TARGET_PSOC6/common/cy_serial_flash_qspi.c

@@ -48,7 +48,7 @@ extern "C" {
 
 /* SMIF slot from which the memory configuration is picked up - fixed to 0 as the driver
  * supports only one device */
-#define MEM_SLOT                                        (0u)
+#define MEM_SLOT                                    (0u)
 
 /** \endcond */
 
@@ -123,21 +123,26 @@ cy_rslt_t cy_serial_flash_qspi_init(
         }
     }
 
-    if((CY_RSLT_SUCCESS == result) && (CY_SMIF_SUCCESS == smifStatus))
+    if((CY_RSLT_SUCCESS != result) || (CY_SMIF_SUCCESS != smifStatus))
     {
-        return CY_RSLT_SUCCESS;
-    }
-    else
-    {
-        Cy_SMIF_MemDeInit(qspi_obj.base);
         cy_serial_flash_qspi_deinit();
-        return (cy_rslt_t)smifStatus;
+        
+        if(CY_SMIF_SUCCESS != smifStatus)
+        {
+            result = (cy_rslt_t)smifStatus;
+        }
     }
+            
+    return result;
 }
 
 void cy_serial_flash_qspi_deinit(void)
 {
-    Cy_SMIF_MemDeInit(qspi_obj.base);
+    if (qspi_obj.base != NULL)
+    {
+        Cy_SMIF_MemDeInit(qspi_obj.base);
+    }
+    
     cyhal_qspi_free(&qspi_obj);
 }
 

targets/TARGET_Cypress/TARGET_PSOC6/mbed_overrides.c

@@ -23,6 +23,10 @@
 #include "mbed_power_mgmt.h"
 #include "rtos_idle.h"
 #include "us_ticker_api.h"
+
+#if defined(CY_ENABLE_XIP_PROGRAM)
+#include "cycfg_qspi_memslot.h"
+#endif /*defined(CY_ENABLE_XIP_PROGRAM)*/
 #if defined(MBED_CONF_TARGET_XIP_ENABLE)
 #include "cy_serial_flash_qspi.h"
 #endif /* defined(MBED_CONF_TARGET_XIP_ENABLE) */
@@ -70,31 +74,26 @@ void mbed_sdk_init(void)
     mailbox_init();
 #endif
 
-#if (CY_CPU_CORTEX_M0P)
-#if defined(COMPONENT_SPE)
     /* Set up the device based on configurator selections */
-    init_cycfg_all();
-#endif
+    cybsp_init();
 
+#if (CY_CPU_CORTEX_M0P)
 #if !defined(COMPONENT_SPM_MAILBOX)
     /* Enable global interrupts */
     __enable_irq();
 #endif
 #else
-#if !defined(TARGET_PSA)
-    /* Set up the device based on configurator selections */
-    cybsp_init();
     /*
      * Init the us Ticker here to avoid imposing on the limited stack space of the idle thread.
      * This also allows the first call to sleep to occur faster.
      */
     us_ticker_init();
-#endif
 
 #if MBED_CONF_TARGET_XIP_ENABLE
     /* The linker script allows storing data in external memory, if needed, enable access to that memory. */
-    cy_serial_flash_init();
-    cy_serial_flash_enable_xip(true);
+    const uint32_t bus_frequency = 50000000lu;
+    cy_serial_flash_qspi_init(smifMemConfigs[0], CYBSP_QSPI_D0, CYBSP_QSPI_D1, CYBSP_QSPI_D2, CYBSP_QSPI_D3, NC, NC, NC, NC, CYBSP_QSPI_SCK, CYBSP_QSPI_SS, bus_frequency);
+    cy_serial_flash_qspi_enable_xip(true);
 #endif
 
     /* Enable global interrupts (disabled in CM4 startup assembly) */