Update source files to new astyle config

This runs `python3 CI/astyle/astyle.py` and commits the result.

Author: matthijskooijman

cores/arduino/Arduino.h

@@ -26,11 +26,11 @@
                      + __GNUC_PATCHLEVEL__)
 #endif
 #if GCC_VERSION < 60300
-#error "GCC version 6.3 or higher is required"
+  #error "GCC version 6.3 or higher is required"
 #endif
 
 #ifdef __IN_ECLIPSE__
-#include "SrcWrapper.h"
+  #include "SrcWrapper.h"
 #endif
 
 #include "wiring.h"

cores/arduino/HardwareSerial.cpp

@@ -28,81 +28,81 @@
 
 #if defined(HAL_UART_MODULE_ENABLED) && !defined(HAL_UART_MODULE_ONLY)
 #if defined(HAVE_HWSERIAL1) || defined(HAVE_HWSERIAL2) || defined(HAVE_HWSERIAL3) ||\
-    defined(HAVE_HWSERIAL4) || defined(HAVE_HWSERIAL5) || defined(HAVE_HWSERIAL6) ||\
-    defined(HAVE_HWSERIAL7) || defined(HAVE_HWSERIAL8) || defined(HAVE_HWSERIAL9) ||\
-    defined(HAVE_HWSERIAL10) || defined(HAVE_HWSERIALLP1)
-// SerialEvent functions are weak, so when the user doesn't define them,
-// the linker just sets their address to 0 (which is checked below).
-#if defined(HAVE_HWSERIAL1)
-HardwareSerial Serial1(USART1);
-void serialEvent1() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL2)
-HardwareSerial Serial2(USART2);
-void serialEvent2() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL3)
-HardwareSerial Serial3(USART3);
-void serialEvent3() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL4)
-#if defined(USART4)
-HardwareSerial Serial4(USART4);
-#else
-HardwareSerial Serial4(UART4);
-#endif
-void serialEvent4() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL5)
-#if defined(USART5)
-HardwareSerial Serial5(USART5);
-#else
-HardwareSerial Serial5(UART5);
-#endif
-void serialEvent5() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL6)
-HardwareSerial Serial6(USART6);
-void serialEvent6() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL7)
-#if defined(USART7)
-HardwareSerial Serial7(USART7);
-#else
-HardwareSerial Serial7(UART7);
-#endif
-void serialEvent7() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL8)
-#if defined(USART8)
-HardwareSerial Serial8(USART8);
-#else
-HardwareSerial Serial8(UART8);
-#endif
-void serialEvent8() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL9)
-HardwareSerial Serial9(UART9);
-void serialEvent9() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIAL10)
-HardwareSerial Serial10(UART10);
-void serialEvent10() __attribute__((weak));
-#endif
-
-#if defined(HAVE_HWSERIALLP1)
-HardwareSerial SerialLP1(LPUART1);
-void serialEventLP1() __attribute__((weak));
-#endif
+  defined(HAVE_HWSERIAL4) || defined(HAVE_HWSERIAL5) || defined(HAVE_HWSERIAL6) ||\
+  defined(HAVE_HWSERIAL7) || defined(HAVE_HWSERIAL8) || defined(HAVE_HWSERIAL9) ||\
+  defined(HAVE_HWSERIAL10) || defined(HAVE_HWSERIALLP1)
+  // SerialEvent functions are weak, so when the user doesn't define them,
+  // the linker just sets their address to 0 (which is checked below).
+  #if defined(HAVE_HWSERIAL1)
+    HardwareSerial Serial1(USART1);
+    void serialEvent1() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL2)
+    HardwareSerial Serial2(USART2);
+    void serialEvent2() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL3)
+    HardwareSerial Serial3(USART3);
+    void serialEvent3() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL4)
+    #if defined(USART4)
+      HardwareSerial Serial4(USART4);
+    #else
+      HardwareSerial Serial4(UART4);
+    #endif
+    void serialEvent4() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL5)
+    #if defined(USART5)
+      HardwareSerial Serial5(USART5);
+    #else
+      HardwareSerial Serial5(UART5);
+    #endif
+    void serialEvent5() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL6)
+    HardwareSerial Serial6(USART6);
+    void serialEvent6() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL7)
+    #if defined(USART7)
+      HardwareSerial Serial7(USART7);
+    #else
+      HardwareSerial Serial7(UART7);
+    #endif
+    void serialEvent7() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL8)
+    #if defined(USART8)
+      HardwareSerial Serial8(USART8);
+    #else
+      HardwareSerial Serial8(UART8);
+    #endif
+    void serialEvent8() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL9)
+    HardwareSerial Serial9(UART9);
+    void serialEvent9() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIAL10)
+    HardwareSerial Serial10(UART10);
+    void serialEvent10() __attribute__((weak));
+  #endif
+
+  #if defined(HAVE_HWSERIALLP1)
+    HardwareSerial SerialLP1(LPUART1);
+    void serialEventLP1() __attribute__((weak));
+  #endif
 #endif // HAVE_HWSERIALx
 
 // Constructors ////////////////////////////////////////////////////////////////

cores/arduino/HardwareSerial.h

@@ -41,20 +41,20 @@
 // often work, but occasionally a race condition can occur that makes
 // Serial behave erratically. See https://github.com/arduino/Arduino/issues/2405
 #if !defined(SERIAL_TX_BUFFER_SIZE)
-#define SERIAL_TX_BUFFER_SIZE 64
+  #define SERIAL_TX_BUFFER_SIZE 64
 #endif
 #if !defined(SERIAL_RX_BUFFER_SIZE)
-#define SERIAL_RX_BUFFER_SIZE 64
+  #define SERIAL_RX_BUFFER_SIZE 64
 #endif
 #if (SERIAL_TX_BUFFER_SIZE>256)
-typedef uint16_t tx_buffer_index_t;
+  typedef uint16_t tx_buffer_index_t;
 #else
-typedef uint8_t tx_buffer_index_t;
+  typedef uint8_t tx_buffer_index_t;
 #endif
 #if  (SERIAL_RX_BUFFER_SIZE>256)
-typedef uint16_t rx_buffer_index_t;
+  typedef uint16_t rx_buffer_index_t;
 #else
-typedef uint8_t rx_buffer_index_t;
+  typedef uint8_t rx_buffer_index_t;
 #endif
 
 // A bool should be enough for this
@@ -78,12 +78,12 @@ typedef enum {
 //#define SERIAL_6N2 0x0A
 
 #ifdef UART_WORDLENGTH_7B
-#define SERIAL_7N1 0x04
-#define SERIAL_7N2 0x0C
-#define SERIAL_6E1 0x22
-#define SERIAL_6E2 0x2A
-#define SERIAL_6O1 0x32
-#define SERIAL_6O2 0x3A
+  #define SERIAL_7N1 0x04
+  #define SERIAL_7N2 0x0C
+  #define SERIAL_6E1 0x22
+  #define SERIAL_6E2 0x2A
+  #define SERIAL_6O1 0x32
+  #define SERIAL_6O2 0x3A
 #endif
 #define SERIAL_8N1 0x06
 #define SERIAL_8N2 0x0E

cores/arduino/Print.cpp

@@ -29,7 +29,7 @@
 #include "Print.h"
 
 #if defined (VIRTIO_LOG)
-#include "virtio_log.h"
+  #include "virtio_log.h"
 #endif
 
 // Public Methods //////////////////////////////////////////////////////////////

cores/arduino/Tone.h

@@ -20,21 +20,21 @@
 #define _WIRING_TONE_
 
 #ifdef __cplusplus
-/*
- * \brief Generate a tone to a pin.
- *
- * \param _pin
- * \param frequency Tone frequency (in hertz)
- * \param duration  Tone duration (in milliseconds)
- */
-extern void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
-
-/*
- * \brief Stop tone generation on pin.
- *
- * \param _pin
- */
-extern void noTone(uint8_t _pin, bool destruct = false);
+  /*
+  * \brief Generate a tone to a pin.
+  *
+  * \param _pin
+  * \param frequency Tone frequency (in hertz)
+  * \param duration  Tone duration (in milliseconds)
+  */
+  extern void tone(uint8_t _pin, unsigned int frequency, unsigned long duration = 0);
+
+  /*
+  * \brief Stop tone generation on pin.
+  *
+  * \param _pin
+  */
+  extern void noTone(uint8_t _pin, bool destruct = false);
 
 #endif
 

cores/arduino/VirtIOSerial.cpp

@@ -27,7 +27,7 @@
 #include "core_debug.h"
 
 #if !defined(VIRTIOSERIAL_NUM)
-#define VIRTIOSERIAL_NUM    1
+  #define VIRTIOSERIAL_NUM    1
 #endif
 
 VirtIOSerialObj_t *VirtIOSerial_Handle[VIRTIOSERIAL_NUM] = {NULL};

cores/arduino/WInterrupts.h

@@ -22,10 +22,10 @@
 #include <stdint.h>
 
 #ifdef __cplusplus
-#include <functional>
+  #include <functional>
 
-typedef std::function<void(void)> callback_function_t;
-void attachInterrupt(uint32_t pin, callback_function_t callback, uint32_t mode);
+  typedef std::function<void(void)> callback_function_t;
+  void attachInterrupt(uint32_t pin, callback_function_t callback, uint32_t mode);
 
 #endif